What is a ceramic stone products? The advantages and disadvantages of it?

Decorative ceramic plate, also known as rock crystal panels, glass-ceramics, is the world's decoration of the new high-end luxury building decoration materials. Its mainly used for high-level hotels, shopping malls, banking halls, hotels, office buildings, subway stations and airports, and other high-level villa both inside and outside of the communal facilities in a permanent wall, ground, cylindrical and surface decoration of its excellent properties and the noble elegance of the decoration effect of the design style of architecture to be the most perfect embodiment.

ceramic stone with natural stone, it has the following characteristics:

1. Microcrystalline days non-radioactive stone building materials through national testing department testing, does not contain any harmful radioactive elements, is one of the most safe green decorative materials.

2. High-gloss surface of the natural stone surface covered with fine cracks are easy to fracture along the crack. Granite and mica particles in the light of the lack of strong material, the surface of particles off the surface of lower gloss stone. Microcrystalline stone to make up for the lack of the surface can be polished to 90 to 120 gloss units, the building full of luxurious modern style.

3. Excellent anti-pollution of the water absorption of ceramic stone to zero, so the water is not easy to infiltrate, not have to worry about freeze damage and rust, concrete slurry, gray infiltration of pollutants within, there is no phenomenon of stone spit juice. Attached to the surface of the dirt is also very easy to scrub clean.

4. Diffuse Reflectance rock crystallite glass phase there are some, but no matter into the glare from any angle, the crystal particles diffuse reflectance, so that the formation of soft jade plate texture, the appearance of a watch is more than the natural stone of the soft Jingying sense of beauty, so that more Ambilight construction. This is the other man-made stone mechanical effects of specular reflection can not be compared.

5. Strength, hardness ceramic stone is the sintering temperature from 1500 degrees Celsius, from wollastonite and glass with a combination of dense phase of the overall crystalline materials, has high strength and hardness. +0086-13950111631.These crystalline phase and glass phase between the end of an extremely high intensity of the molecular interface, more rigid than natural stone, more wear-resistant, easily damaged and broken, and no structure of natural stone texture (often fracture from here); and man-made stone is generally mixed with an organic polymer resin molding powder to suppress, so the hardness of low and easy to wear, aging and easy to fade, after the easy deformation temperature. Microcrystalline stone there is no such defects.